Free delivery over £500

5-Star Google Reviews

Always Free Samples

Family Owned

Fixing Skirting Board to Masonry, Stud and Plaster Walls

Fix skirting to masonry with adhesive and screws into wall plugs, and to a stud wall with nails or screws into the studs. Always scan the wall for pipes and cables first.

Which fixing for which wall?

Wall type Fixing Notes
Brick or block (masonry) Adhesive plus screws into wall plugs Use a masonry bit, countersink the screw heads and fill
Stud (plasterboard) Nails or screws into the studs, plus adhesive Find the studs with a detector and mark them on the board
Plastered masonry As for masonry Drill through the plaster into the masonry behind
Old lath and plaster Screws into timbers or plugs, with adhesive Be careful of loose plaster

How do I fix skirting to masonry?

  1. Check for pipes and cables with a detector.
  2. Hold the board in place and mark the fixing points, roughly every 500mm, and near each end.
  3. Drill through the board with a bit sized for your screw, countersink, then drill the wall with a masonry bit.
  4. Fit wall plugs, apply adhesive, and screw the board home.

How do I fix skirting to a stud wall?

Find the studs and mark their centres on the board. Fix through the board into each stud with nails or screws, and add adhesive between the studs. Oak is hard, so drill pilot holes first.

How do I hide the fixings?

Countersink or punch the heads below the surface and fill with a matching filler. For oak, choose an oak-coloured filler, or one you can finish with the same stain. See our Help Centre guides for finishing oak.

Want the full job?

Follow our oak fitting guide, or see uneven walls. Shop skirting board. Prices include VAT, and delivery is free over £500.

Products mentioned in this guide